
Industries
Cement lubricants
Gear oil, hydraulic oil, compressor oil, heavy-duty grease and engine oil for cement plants, crushers, mills and mining fleets.
Lubricants for cement plants and the fleets that serve them
A cement plant never stops for long. Crushers, raw mills, the kiln drive, cement mills, fans, elevators and packing lines all run under heavy load in fine, abrasive dust and heat. When one drive stops, the whole line can wait, so the right oil and grease at every point matters more than the small cost of the lubricant itself.
Lukeron Lubricants blends gear oils, hydraulic oils, compressor oils, greases and heavy-duty diesel engine oils at its plant in Anandpar, Jamnagar district, Gujarat. We supply plants, contractors and fleets in drums and barrels, and we offer free samples so you can test an oil on one machine before you order.
Where a cement plant uses oil and grease
- Gearboxes on mills, crushers, fans and conveyors
- Kiln drive and mill drive gears (follow the maker's lubricant advice)
- Hydraulic systems on stackers, reclaimers, crushers and kiln support rollers
- Air compressors for packing plants and bag filters
- Bearings on fans, motors, rollers and elevators
- Mining and transport fleets: dumpers, loaders and trucks
- Wire ropes on cranes and hoists
Gear oil for mills, crushers and conveyors
Heavy gearboxes in a cement plant usually take an extreme-pressure (EP) industrial gear oil in the ISO VG grade the gearbox maker names. The grade depends on load, speed and temperature, so read the nameplate or manual before you fill. Our guide on industrial gear oil explains how to choose.
Lukeron makes HD gear EP oils for heavy industrial gearboxes. Tell us the gearbox make, model and grade and we will confirm what we can supply.
Kiln and mill girth gears
Large open gears, such as kiln and mill girth gears, are normally lubricated with a special open gear lubricant that the plant or the machine maker names. This is not an ordinary gear oil or grease. Send us the maker's specification and we will tell you honestly whether we can supply it.
Hydraulic oil for heavy equipment
Hydraulic systems in a plant work with dust all around them and often in high heat. Use an anti-wear (AW) hydraulic oil in the ISO VG grade the equipment maker names, keep the tank breather and filters in good order, and top up only with the same type of oil. Our guide on hydraulic oil explains the grades.
Grease for bearings in dust and heat
Fans, motors, rollers and elevators run on bearings that live in dust and heat. High-temperature greases and calcium sulfonate or lithium complex greases are widely used in this kind of duty. Choose the NLGI grade and base the manual names, and grease on the schedule it gives. Too little grease starves a bearing and too much can overheat it.
Compressor oil for packing and filter systems
Air compressors that feed packing machines and bag filters should use the compressor oil type and grade the compressor maker names. Screw compressors and reciprocating compressors take different oils, so do not swap them. Our guide on compressor oil explains the difference.
Engine oil for dumpers, loaders and trucks
Limestone and cement are moved by heavy fleets. Heavy-duty diesel engines normally take an engine oil in the viscosity grade and API level the manual names, for example 15W-40. Lukeron makes a heavy-duty 15W-40 oil with API CI-4 PLUS for engines that name it. Always follow the engine manual first.
How to choose the right lubricant for your plant
- List each machine and its lubrication points: gearbox, hydraulics, bearings, compressor, fleet.
- Note the grade and specification the maker names for each one.
- Do not mix oils, and do not swap a grease or oil for another type unless the maker allows it.
- Ask for a sample and test it on one machine first.
- Set a check and change schedule by running hours, as the maker says.
Lukeron products for cement plants
HD Gear EP Oils, ISO VG 220
For heavy industrial gearboxes on mills, crushers and conveyors.
Hydraulic Oil AW / HLP, VG 32 / 46 / 68
For hydraulic systems on plant and mining equipment.
Screw Compressor Oil, ISO VG 46 / 68
For plant air compressors.
High-Temp Non Melt Grease
For bearings that run hot.
Calcium Sulfonate Grease, NLGI 2
For bearings in dust, water and heavy load.
Lithium Complex Moly Grease, NLGI 3
For heavily loaded bearings and joints.
SPL HDEO 15W-40 API CI-4 PLUS
For dumpers, loaders and trucks that name 15W-40.
Frequently asked questions
Which gear oil is used in cement plant gearboxes?
Most heavy gearboxes take an extreme-pressure (EP) industrial gear oil in the ISO VG grade the gearbox maker names. Lukeron makes HD gear EP oils. Send us the gearbox details and we will confirm the match.
Can you supply oil for kiln and mill girth gears?
Open gears usually need a special open gear lubricant named by the machine maker. Send us the specification and we will tell you honestly whether we can supply it.
Which hydraulic oil should I use on plant equipment?
An anti-wear (AW) hydraulic oil in the ISO VG grade the equipment maker names, often VG 46 or VG 68. Lukeron makes AW hydraulic oils.
Which grease is good for bearings in dust and heat?
High-temperature greases and calcium sulfonate or lithium complex greases are widely used for this duty. Pick the NLGI grade the manual names.
Do you supply engine oil for dumpers and trucks?
Yes. Lukeron makes a heavy-duty 15W-40 engine oil with API CI-4 PLUS, along with other heavy-duty diesel oils. Follow the engine manual for the grade.
Can I get a sample before a bulk order?
Yes. Lukeron offers free samples to garages, OEMs and industries. Send your enquiry and we will arrange it.
How do I order for a cement plant?
Send your equipment list, quantity and location. We reply within 24 hours. We pack in drums and barrels, and for urgent needs you can call or WhatsApp +91 73832 79438.
Product families for cement
Tell us your equipment and operating conditions โ we'll recommend the exact grades from these families and quote by the drum, barrel or tanker.
15 products
Industrial oils
Hydraulic, gear, compressor, turbine and thermic oils for plants and mills.
Browse24 products
Greases
Automotive and industrial greases โ calcium, lithium, complex, moly and high-temperature non-melt.
BrowseRead the guides
May 16, 2026
Industrial Gear Oil Selection Guide: EP 220, EP 320, and Synthetic Options
ReadMay 14, 2026
Hydraulic Oil AW 46 vs AW 68 โ Which to Choose? | Lukeron Lubricants
ReadMay 25, 2026
NLGI Grease Grades Explained: How to Choose Between NLGI 0, 1, 2, and 3
ReadMay 30, 2026
Compressor Oil Guide: Selecting the Right Oil for Screw, Reciprocating, and Vane Compressors
ReadBuying industrial oils for the cement industry?
Lukeron makes hydraulic, gear, compressor, turbine and thermic oils at its own plant in Jamnagar, and supplies plants, mills, OEMs and dealers.
Lubricants for cement โ quoted to your plant.
Tell us your machine, fleet or brand. We reply within 24 hours.

