📍 Meet Lukeron at Kutch Industrial Expo, 11–13 DecStall C-338, Hall C, Dome 3 · WhatsApp: Office · Sales
Lukeron Lubricants Private Limited – It's not an oil, it's a medicine

Industrial · May 16, 2026

Industrial Gear Oil Selection Guide: EP 220, EP 320, and Synthetic Options

By Lukeron Lubricants · Last updated

Quick answer

ISO VG is how thick a gear oil is at 40 °C. VG 220 is the most commonly specified grade for enclosed industrial gearboxes in India. VG 320 is for heavier loads, slower speeds and hotter running. VG 68 and 100 are for lighter loads and higher speeds. EP additives protect the gears under heavy or shock loads. Synthetic gear oils last longer but cost more. Always follow the gearbox maker's manual.

Industrial gear oil grade chart

ISO VG gradeViscosity at 40 °C (cSt)Typically used for
VG 6861.2 to 74.8Lightly loaded, high-speed gearboxes
VG 10090 to 110Medium-speed enclosed gears
VG 150135 to 165Enclosed helical, bevel and worm gears under moderate load
VG 220198 to 242The most commonly specified grade for enclosed industrial gearboxes in India
VG 320288 to 352Heavily loaded, slow-speed or high-temperature gearboxes
VG 460 and 680414 to 748Extreme loads, for example cane mill gearboxes (VG 460) and some mining uses

Viscosity limits are the ISO VG classes (ISO 3448). The uses shown are typical. Follow the gearbox maker's manual.

Industrial gearboxes are some of the most heavily loaded components in any manufacturing plant. A poorly lubricated gearbox can fail within months; a well-lubricated one lasts decades. Selecting the correct gear oil — the right viscosity grade, the right additive type, and the right base oil technology — is one of the most important decisions a plant engineer or maintenance manager makes.

Why Gear Oil Selection Matters More Than Most Think

The consequences of incorrect gear oil selection range from accelerated tooth wear and pitting to catastrophic gear failure and costly unplanned downtime. In industries like ceramic tile manufacturing, sugar milling, or steel rolling, even a few hours of unplanned downtime can cost more than a full year’s worth of correct lubricant purchases.

ISO VG Viscosity Grades for Industrial Gearboxes

Industrial gear oils are classified by ISO VG (Viscosity Grade). Common grades are: VG 68 — for lightly loaded, high-speed gearboxes; VG 100 — for medium-speed enclosed gears; VG 150 — for enclosed helical, bevel, and worm gears under moderate load; VG 220 — the most commonly specified grade for enclosed industrial gearboxes in India; VG 320 — for heavily loaded gearboxes, slow-speed units, and high-temperature environments; VG 460 and 680 — for extreme load applications like mining and open gears in special circumstances.

EP (Extreme Pressure) Additives — When Are They Needed?

Standard industrial gear oils (R&O type) rely on viscosity alone for film formation. Under severe loads, especially shock loads, the oil film can break down and allow metal contact. EP additives — typically sulphur-phosphorus compounds — react with metal surfaces under extreme pressure to form a sacrificial layer that prevents seizure and pitting. EP gear oils are essential for worm gears, hypoid gears, heavily loaded helical gears, and most gearboxes in mining, steel, and heavy-duty industrial applications.

Mineral vs Synthetic Gear Oils

Mineral gear oils are petroleum-derived and provide good performance at an affordable cost. They are suitable for most standard industrial gearboxes with conventional oil change intervals (6–12 months). Synthetic gear oils — typically PAO (polyalphaolefin) or PAG (polyalkylene glycol) based — offer significantly longer service life (2–3 years), better viscosity stability across temperature extremes, lower friction coefficients (energy saving), and superior oxidation resistance. For high-value gearboxes, the higher cost of synthetic is usually recovered through extended drain intervals and reduced maintenance.

Industry-Specific Recommendations

Ceramic industry: large ball mill gearboxes typically run on VG 320 EP; conveyor and fan gearboxes on VG 220 EP. Mining: conveyors and crushers on VG 320 EP; open gears on bitumen-based or semi-fluid open gear compounds. Steel: rolling mill gearboxes on VG 220 or 320 EP synthetic; finishing stands on VG 68 or 100. Sugar mills: cane mill gearboxes on VG 460 EP; centrifuge drives on VG 220. Textile: spindle drives on VG 68 or 100; main gearboxes on VG 220.

Share this article

Industrial gear oil questions, answered

What does ISO VG 220 mean?+

ISO VG 220 means the oil is about 220 cSt thick at 40 °C. It is the most commonly specified grade for enclosed industrial gearboxes in India. The number shows thickness, not quality.

Should I use VG 220 or VG 320?+

Follow the gearbox maker's manual first. VG 320 is generally chosen for heavier loads, slower speeds and hotter running. VG 220 is the usual choice for most enclosed gearboxes.

What is EP gear oil?+

EP means extreme pressure. EP additives form a protective layer on gear surfaces under heavy or shock loads, which helps prevent seizure and pitting. EP oils are typically needed for worm gears, hypoid gears and heavily loaded gears.

When is synthetic gear oil worth the higher price?+

Synthetic gear oils typically last longer (this guide gives 2 to 3 years against 6 to 12 months for mineral oil) and hold their thickness better across temperature extremes. In high-value gearboxes the extra cost is often recovered through fewer oil changes.

Can I mix different gear oils?+

Avoid it. Different oils can have different additives. Ask your supplier and the gearbox maker first, and drain and flush when you change the oil type.

Which industrial gear oils does Lukeron make?+

Lukeron makes HD gear EP oils in ISO VG 220 and 320, a worm gear oil and an industrial synthetic gear oil, in 20 litre and 210 litre packs. Free samples are available.

More: Lukeron HD gear EP oils · Industrial lubricant manufacturer · Viscosity converter: cSt, SSU and ISO VG

Standards and sources

Standards are named so you can look them up. Always follow your equipment maker's manual.

Need industrial gear oil for your plant or workshop?

Get a quote and data sheets within 24 hours. Just your name and mobile number.

Chat on WhatsApp

We use your details only to reply to this request. See our privacy policy.

Buying industrial oils for your plant?

Lukeron makes hydraulic, gear, compressor, turbine and thermic oils at its own plant in Jamnagar.

Related Lukeron product families

More from the journal

Need the right grade, pack size and price?

Tell us your machine, fleet or brand. We reply within 24 hours.