📍 Meet Lukeron at Kutch Industrial Expo, 11–13 DecStall C-338, Hall C, Dome 3 · WhatsApp: Office · Sales
Lukeron Lubricants Private Limited – It's not an oil, it's a medicine

Automotive · November 16, 2026

What Is Gear Oil? Meaning, GL-4, GL-5, Grades and Uses

By Lukeron Lubricants · Last updated

Quick answer

Gear oil is the thick oil that protects the gears in a gearbox, differential or axle. It carries extreme-pressure (EP) additives for heavy loads. API GL-4 suits moderate loads and many manual gearboxes. API GL-5 is made for heavy-load hypoid gears such as differentials and rear axles. Grades like 80W-90 and 85W-140 show how thick the oil is, cold and hot. The class and grade in the vehicle or machine maker's manual always come first.

Gear oil at a glance

LabelWhat it tells youTypically used for
API GL-4Moderate extreme-pressure protectionMany manual gearboxes and transaxles
API GL-5Strong extreme-pressure protectionDifferentials, rear axles and hypoid gears
75W-90, 80W-90Thinner when hot and easier to flow when coldCars, SUVs and light trucks, as the maker names
85W-140Thicker when hotHeavy-duty axles and hot, loaded work
ISO VG 220, 320Industrial thickness gradesIndustrial gearboxes in plants and mills

General guidance only. Follow the vehicle or machine maker's manual for the API class and the viscosity grade.

Gear oil is the thick lubricating oil that protects the gears in a gearbox, a differential or an axle. Gears press against each other with great force, and a thin oil film is all that keeps the metal apart. This guide explains what gear oil is, how it differs from engine oil, what GL-4, GL-5 and EP mean, the common grades and how to choose the right one.

What is gear oil?

Gear oil is a lubricant made for gears. It is usually thicker than engine oil and carries additives for heavy loads. It is used in manual gearboxes, differentials, rear axles, transfer cases, scooter and motorcycle gearboxes and industrial gearboxes. In Hindi it is called गियर ऑयल and in Gujarati ગિયર ઓઇલ.

What does gear oil do?

  • Lubricates: it keeps a film between gear teeth so they do not touch metal to metal.
  • Protects under pressure: extreme-pressure (EP) additives guard the teeth when the load is very high.
  • Cools: it carries heat away from the gears and bearings.
  • Protects against rust and corrosion inside the housing.
  • Reduces noise and wear, and helps the gears run smoothly.

Gear oil and engine oil: the difference

Engine oil is made for a combustion engine. It carries detergent and dispersant additives to handle soot and fuel by-products. Gear oil is made for gear teeth under very heavy pressure, so it is thicker and carries EP additives. Using engine oil in a gearbox that needs gear oil can leave the gears under-protected. Some scooter and motorcycle gearboxes share the engine oil, so check the manual before you decide.

What do GL-4 and GL-5 mean?

GL stands for gear lubricant. The API GL class tells you how much extreme-pressure protection the oil carries. GL-4 is for moderate loads and is used in many manual gearboxes. GL-5 carries a stronger extreme-pressure additive package and is made for the heavy loads in hypoid gears, such as differentials and rear axles. A higher number is not always better. Some manual gearboxes are designed for GL-4, so use the class the maker names.

What does the number on gear oil mean?

For automotive gear oil, grades such as 75W-90, 80W-90 and 85W-140 are SAE gear oil grades. The part with W shows how well the oil flows when cold. The second number shows the thickness when hot. A higher second number means a thicker oil when hot. Industrial gear oil uses ISO VG grades such as VG 220 or VG 320. Our guide on gear oil grades explains the numbers in detail.

Mineral or synthetic gear oil

Mineral gear oil is made from refined base oil and suits most normal use. Synthetic gear oil is made from synthetic base oil. It flows better in the cold and resists heat and ageing longer, so it is chosen for hot, heavy or long-drain use. Neither is better in every case. Follow the maker and the working conditions.

Where is gear oil used?

  • Cars, SUVs and trucks: manual gearboxes, differentials and rear axles.
  • Tractors and farm machines: transmissions and final drives, where the manual may ask for a special tractor oil.
  • Scooters and motorcycles: the gearbox oil in many scooters.
  • Industrial machines: worm, spur and helical gearboxes in mills, conveyors and plants.
  • Marine: marine gearboxes, which use their own gear oil.

How to choose gear oil in four steps

  • Read the manual: use the API class (GL-4 or GL-5) and the viscosity grade the maker names.
  • Match the part: a differential and a manual gearbox may need different oils, even in the same vehicle.
  • Match the conditions: hot, heavy or dusty work may call for a synthetic oil or a more frequent change, as the maker advises.
  • Choose a supplier who can tell you the class, the grade and the pack, and who gives a free sample to test.

When to change gear oil

Gear oil lasts longer than engine oil, but not forever. The interval depends on the vehicle or machine and how it is used, so follow the manual. Dark oil, a burnt smell, metal shine in the oil, whining noise or a gearbox that is hard to shift are reasons to have it checked.

Mistakes to avoid

  • Using engine oil where gear oil is needed.
  • Using the wrong GL class or the wrong viscosity because it was the only drum in the store.
  • Mixing different gear oils without checking they are compatible.
  • Filling the housing above the level mark, which makes the oil hot and foamy.
  • Leaving drums open or outside in sun and rain.

Lukeron gear oils

Lukeron makes gear oils for automotive and industrial use, including API GL-4 and GL-5 gear oils, tractor transmission oil and industrial gear oil. Tell us your vehicle or machine, the gearbox type and the working conditions, and we will help you choose, and send a free sample to test. Follow the maker's class and grade.

Share this article

Gear oil questions, answered

What is gear oil?+

Gear oil is a thick lubricating oil made for gears. It protects the gears in manual gearboxes, differentials, axles and industrial gearboxes under heavy loads.

What is gear oil called in Hindi and Gujarati?+

Gear oil is written गियर ऑयल in Hindi and ગિયર ઓઇલ in Gujarati. It is the oil used in gearboxes, differentials and axles.

What is the difference between gear oil and engine oil?+

Engine oil is made for a combustion engine and carries detergents for soot and fuel by-products. Gear oil is thicker and carries extreme-pressure additives for gear teeth under heavy load. Use the one the maker names.

What does GL-5 mean on gear oil?+

GL-5 is an API gear lubricant class with strong extreme-pressure protection. It is made for heavy-load hypoid gears such as differentials and rear axles.

What is the difference between GL-4 and GL-5?+

GL-4 carries a lighter extreme-pressure package for moderate loads and many manual gearboxes. GL-5 carries a stronger package for heavy loads. A higher class is not always better, so use the class the maker names.

What does 80W-90 mean on gear oil?+

It is an SAE gear oil grade. The number with W shows how well the oil flows when cold, and the second number shows how thick it is when hot.

What does EP mean in gear oil?+

EP means extreme pressure. EP additives protect the gear teeth when the load is very high and the oil film is thin.

Can I use engine oil instead of gear oil?+

Not in a gearbox that needs gear oil. Engine oil does not carry the extreme-pressure protection that heavy gears need. Some scooter and motorcycle gearboxes share the engine oil, so check the manual.

Should I choose mineral or synthetic gear oil?+

Mineral gear oil suits most normal use. Synthetic flows better in the cold and resists heat and ageing longer, so it suits hot, heavy or long-drain use. Follow the maker and the working conditions.

When should gear oil be changed?+

Follow the manual. Dark oil, a burnt smell, metal shine in the oil, a whining noise or a hard-to-shift gearbox are reasons to have it checked.

Which gear oils does Lukeron make?+

Lukeron makes gear oils for automotive and industrial use, including API GL-4 and GL-5 gear oils, tractor transmission oil and industrial gear oil. Free samples are available.

More: Gear oil grades: 80W-90, EP-90 and 85W-140 · Motorcycle gear oil: GL-4 vs GL-5 · Gear oil vs grease for gearboxes · Industrial gear oil: VG 220 or 320 · All Lukeron gear and transmission oils

Standards and sources

  • SAE J306: Automotive gear lubricant viscosity classification (grades such as 80W-90 and 85W-140). Published by SAE International.
  • SAE J308: Information on axle and manual transmission lubricants, including the API GL service classes. Published by SAE International.
  • ISO 3448: Industrial liquid lubricants: ISO viscosity classification (ISO VG 32, 46, 68 and so on). Published by International Organization for Standardization.

Standards are named so you can look them up. Always follow your equipment maker's manual.

Need industrial gear oil for your plant or workshop?

Get a quote and data sheets within 24 hours. Just your name and mobile number.

Chat on WhatsApp

We use your details only to reply to this request. See our privacy policy.

Buying industrial oils for your plant?

Lukeron makes hydraulic, gear, compressor, turbine and thermic oils at its own plant in Jamnagar.

Related Lukeron product families

More from the journal

Need the right grade, pack size and price?

Tell us your machine, fleet or brand. We reply within 24 hours.