By Lukeron Lubricants ยท Last updated
Quick answer
Hydraulic oil is the fluid that carries power inside a hydraulic machine, and it also lubricates, cools, seals and protects the pump and valves. Most industrial machines use an anti-wear (AW) oil. Outdoor machines that start cold and run hot often use a high viscosity index (HVI) oil. The number on the label (VG 32, 46 or 68) is how thick the oil is at 40 ยฐC. The grade and type in the machine maker's manual always come first.
Hydraulic oil types at a glance
| Type | What it adds | Typically used for |
|---|---|---|
| Plain mineral (HL) | Rust and oxidation protection | Light-duty systems at moderate pressure |
| Anti-wear (AW, HLP) | Anti-wear protection for the pump | Most industrial and mobile hydraulic systems |
| High viscosity index (HVI, HVLP) | A more stable thickness when the temperature changes | Outdoor machines, cold starts and hot running |
| Fire-resistant or biodegradable fluids | Fire or environmental safety | Special systems, as the maker names |
General guidance only. Follow the machine maker's manual for the type, the viscosity grade and the cleanliness level.
Hydraulic oil is the fluid that carries power inside a hydraulic machine. A pump pushes the oil, the oil moves a cylinder or motor, and that movement lifts a bucket, closes a press or turns a wheel. Because the oil also lubricates, cools and protects the parts it touches, the choice of hydraulic oil decides how long the pump and valves last. This guide explains what hydraulic oil is, what it is made of, the main types, where each is used and how to choose.
What is hydraulic oil?
Hydraulic oil is a lubricating oil made for hydraulic systems. A liquid cannot be squeezed, so when a pump pushes oil through a closed system, the force travels through the oil to wherever it is needed. That is how a small lever can move a heavy load. In Hindi it is called เคนเคพเคเคกเฅเคฐเฅเคฒเคฟเค เคเคฏเคฒ and in Gujarati เชนเชพเชเชกเซเชฐเซเชฒเชฟเช เชเชเชฒ.
What does hydraulic oil do?
- Transmits power: it carries the force from the pump to the cylinder or motor.
- Lubricates: it keeps pump, valve and cylinder parts from touching metal to metal.
- Cools: it carries heat away from the pump and the pressure points to the tank.
- Seals: it fills the very small gaps between moving parts so pressure does not leak away.
- Protects: additives fight wear, rust and foam, and help the oil resist ageing.
- Cleans: it carries dirt and wear particles to the filter.
What is hydraulic oil made of?
Most hydraulic oil is a base oil with an additive package. The base oil does most of the work. The additives add what the base oil cannot do alone: anti-wear protection, rust and corrosion protection, resistance to oxidation (ageing), foam control and, in some oils, a more stable viscosity when the temperature changes. The additive package is what separates a plain hydraulic oil from an anti-wear (AW) hydraulic oil.
Main types of hydraulic oil
Letters on the label tell you the type. These are the common ones.
- Plain mineral hydraulic oil (often marked HL): base oil with rust and oxidation protection, for light-duty systems.
- Anti-wear hydraulic oil (AW, often marked HLP): adds anti-wear additives for pumps working under pressure. This is the most widely used type in industry.
- High viscosity index hydraulic oil (HVI or HV, often marked HVLP): keeps its thickness better when the temperature swings, which suits outdoor machines that start cold and run hot.
- Fire-resistant and biodegradable fluids: special fluids for places where a fire risk or an environmental rule applies. These are chosen by the system maker.
A letter code is not a guarantee of quality. Always compare the specification with what the machine maker asks for.
What does the number on hydraulic oil mean?
The number is the viscosity grade (ISO VG), the thickness of the oil at 40 ยฐC in centistokes. VG 32 is thinner, VG 46 is the usual middle choice and VG 68 is thicker. A higher number means a thicker oil, not a better one. Our guide on VG 32, 46 and 68 explains how to pick between them.
Where is hydraulic oil used?
- Construction machines: excavators, loaders, backhoes and cranes.
- Factory machines: presses, injection moulding machines, machine tools and lifts.
- Material handling: forklifts and hydraulic lifts.
- Farm machines: tractors and implements. Some tractors share one oil for the hydraulics and the gearbox, so check the manual.
- Workshop equipment: car lifts, jacks and hydraulic presses.
Hydraulic oil, engine oil and gear oil: the difference
They look alike but are made for different jobs. Engine oil is made for combustion engines and carries detergent additives to handle soot and fuel. Gear oil is made for gears and often carries extreme-pressure (EP) additives. Hydraulic oil is made to move power through a pump and valves and to resist foam and water. Do not swap them casually. Use what the machine maker names.
How to choose hydraulic oil in four steps
- Read the manual: use the viscosity grade and the type the machine maker names.
- Match the type to the system: an AW oil for most pump systems, an HVI oil where the temperature swings widely.
- Check the working temperature: hot, high-pressure machines often need a thicker grade than cool, light-duty ones, but follow the maker.
- Choose a supplier who can tell you the grade, the type and the pack you need, and who gives a free sample to test.
Signs hydraulic oil needs attention
- Milky or cloudy oil: water has got in.
- Foam in the tank: air is getting in, or the oil has degraded.
- Dark oil with a burnt smell: the oil has overheated.
- A noisy pump, slow movement or high temperature: check the oil level, the oil condition and the filter.
The change interval depends on the machine, the hours worked and the cleanliness. Follow the maker, and use an oil test if your site runs one.
Mistakes to avoid
- Mixing different types or brands without checking they are compatible.
- Using the wrong viscosity grade because it was the only drum in the store.
- Topping up with dirty oil or from an open container. Dirt is the main enemy of a hydraulic system.
- Ignoring the filter. A blocked filter harms the pump.
- Leaving drums open or outside in the sun and rain. Store them as our guide on storing lubricants explains.
Lukeron hydraulic oils
Our anti-wear hydraulic oil range is available in ISO VG 32, 46 and 68, with HVI options, in 20 litre and 210 litre packs. The ECO hydraulic oil, for small factories, workshops and agricultural machinery, comes in VG 32, 46 and 68 in 5 litre to 210 litre packs. Tell us your machine, pump type and working temperature, and we will help you choose, and send a free sample to test. Follow the machine maker's grade and cleanliness requirements.
