By Lukeron Lubricants ยท Last updated
Quick answer
Engine oil lubricates, cools, cleans and protects an engine. On the label, 20W-40 is the viscosity grade (how thick the oil is, cold and hot), and API SN is the performance category (S is for petrol engines, C for diesel; a later letter is a newer standard). Bike oils may also show JASO MA or MB. Use the grade and category in the vehicle maker's manual.
How to read an engine oil label
| On the label | What it tells you | Example |
|---|---|---|
| SAE grade | How thick the oil is: the number before W is for cold starts, the number after is for working temperature | 20W-40, 10W-30 |
| API S category | Performance level for petrol engines. A later letter is newer | SN, SP |
| API C category | Performance level for diesel engines. A later letter or number is newer | CI-4, CK-4 |
| JASO | For four-stroke motorcycles: MA and MA2 for wet-clutch engines, MB for automatic scooters | JASO MA, JASO MB |
| Base oil kind | Mineral, semi-synthetic or fully synthetic | Written on the pack |
General guidance only. Follow the vehicle maker's manual for the viscosity grade and the performance category.
Engine oil is the oil that keeps an engine running smoothly. It forms a thin film between moving parts, carries heat away and holds dirt in suspension until the oil is changed. The label on the pack carries codes such as 20W-40, 10W-30, API SN or JASO MA, and many buyers do not know what they mean. This guide explains what engine oil is, what it does, and how to read every code on the label.
What is engine oil?
Engine oil is a lubricant made for combustion engines in motorcycles, scooters, cars, trucks, tractors and generators. It is a base oil mixed with an additive package. The base oil does the lubricating. The additives add cleaning, wear protection, rust protection, foam control and resistance to heat and ageing. In Hindi it is called เคเคเคเคจ เคเคฏเคฒ and in Gujarati เชเชจเซเชเชฟเชจ เชเชเชฒ.
What does engine oil do?
- Lubricates: it keeps a film between moving parts so metal does not rub on metal.
- Cools: it carries heat away from the piston, bearings and other hot parts.
- Cleans: detergent additives hold soot and deposits in the oil, so they do not stick inside the engine.
- Seals: it helps the piston rings seal against the cylinder wall.
- Protects: it guards against rust, corrosion and wear.
What do the numbers like 20W-40 mean?
This is the SAE viscosity grade, the thickness of the oil. The number before the W (W stands for winter) shows how well the oil flows when the engine is cold. A lower number flows more easily at a cold start. The number after the dash shows how thick the oil stays at the normal working temperature. So 10W-30 flows more easily when cold than 20W-40, and 20W-40 is thicker when hot than 10W-30. A higher number is not better. Use the grade the maker names in the manual.
What does API SN or API SP mean?
API is the American Petroleum Institute. The API service category shows what level of performance the oil meets. The first letter shows the engine type: S is for petrol (spark ignition) engines and C is for diesel (compression ignition) engines. The second letter shows the generation, and a letter later in the alphabet is a newer standard. For example, SP is newer than SN for petrol engines, and CK-4 is newer than CI-4 for diesel engines. Always use the category the maker names or a newer one that the maker allows.
What does JASO MA or MB mean on a bike oil?
JASO is the Japanese Automotive Standards Organization. For four-stroke motorcycles, JASO MA and MA2 are for engines where the oil is shared with a wet clutch, which is the case in most geared motorcycles. JASO MB is for scooters with an automatic gearbox, where the oil does not touch a wet clutch. Use the JASO class the maker names. Our guide on bike and scooter engine oil explains this in detail.
Mineral, semi-synthetic and fully synthetic
Engine oil comes in three kinds, by the base oil. Mineral oil is made from refined crude oil and suits many ordinary engines. Semi-synthetic oil blends mineral and synthetic base oils. Fully synthetic oil uses synthetic base oil and is chosen where the maker asks for it, or for hot, demanding or long-drain use. The best choice is the oil that meets the maker's grade and category. Our guide on mineral vs synthetic engine oil explains the difference.
How to read an engine oil label: a quick example
Take a label that reads 20W-40 API SN. Read it in three steps. First, 20W-40 is the viscosity grade: it flows reasonably well when cold and stays fairly thick when hot. Second, API SN is the performance category for petrol engines. Third, check whether the pack names the vehicle type, for example motorcycle or car, and compare it with your manual.
How to choose engine oil in four steps
- Read the manual: use the viscosity grade and the performance category the maker names.
- Match the engine: petrol, diesel, motorcycle, scooter and tractor engines need different oils.
- Match the conditions: heat, heavy load and stop-start traffic may call for a shorter change interval or a more advanced oil, as the maker advises.
- Buy from a supplier who can tell you the grade and the category, and who sells original, sealed packs.
Mistakes to avoid
- Choosing by colour or by price alone.
- Using a car oil in a motorcycle with a wet clutch, or the reverse.
- Using a grade because it was the only pack in the shop.
- Mixing oils without checking they are compatible.
- Ignoring the change interval in the manual.
Lukeron engine oils
Lukeron makes engine oils for motorcycles and scooters, cars, trucks and tractors, in mineral, semi-synthetic and fully synthetic grades. Tell us your vehicle and your conditions, and we will help you choose, and send a free sample to test. Follow the maker's grade and category.
