📍 Meet Lukeron at Kutch Industrial Expo, 11–13 DecStall C-338, Hall C, Dome 3 · WhatsApp: Office · Sales
Lukeron Lubricants Private Limited – It's not an oil, it's a medicine

Technical Guide · May 27, 2026

How to Store Lubricants Properly: Preventing Contamination and Degradation

By Lukeron Lubricants · Last updated

Poor lubricant storage is one of the most overlooked causes of equipment failure in Indian industry. A lubricant that meets full specifications when it leaves the factory can be significantly degraded by the time it reaches the machine — if it was stored incorrectly. Contamination, water ingress, oxidation, and cross-contamination are all preventable with proper storage practices.

The Biggest Threat: Water Contamination

Water is the most common and most damaging contaminant in stored lubricants. Even small amounts of water (above 0.1%) can cause hydraulic pump cavitation, accelerate bearing corrosion, degrade additive packages, and promote microbial growth in certain oils. Outdoor drum storage is a major culprit — when drums are stored horizontally, rainwater collects around the bung (cap) and is drawn in as the drum breathes during temperature cycling. Always store drums vertically with the bung at the top, and ensure bungs are tightly sealed.

Temperature Effects on Stored Lubricants

Lubricants should ideally be stored at stable, moderate temperatures, away from heat sources. In Indian summer conditions, outdoor storage in direct sunlight can heat the drums a great deal. This accelerates oil oxidation, can cause wax separation in some oils, and places stress on container seals. Where possible, lubricants should be stored in a covered, ventilated store. If outdoor storage is unavoidable, drums should be shaded and covered with reflective or insulating material.

Cross-Contamination Prevention

In many workshops and industrial stores, lubricants of different types are dispensed using the same funnels, nozzles, and pumps. Even small amounts of cross-contamination can cause problems — gear oil contaminating hydraulic oil can clog servo valves; a different grade of engine oil mixed with the correct grade changes viscosity and performance. Dedicate separate dispensing equipment to each lubricant type, and colour-code or clearly label all dispensing tools.

Drum Rotation: First In, First Out

All lubricants have a shelf life. The shelf life of a product is stated on its data sheet or label. Store it correctly and use it within that time. Once opened, oxidation begins and the oil should be used within a reasonable timeframe. Implement FIFO (First In, First Out) stock management — always use older stock first. Mark drums with the date of receipt and opening date.

Grease Storage Specifics

Greases are particularly vulnerable to contamination because their thickener structure can trap and hold contaminants. Grease containers should always be kept sealed when not in use. Spatulas and dispensing tools used in grease containers must be clean and dry. Never mix different grease types — many thickeners (lithium, calcium, polyurea) are incompatible and the mixture can have significantly degraded performance.

Lukeron Lubricants provides product storage guidance with all deliveries. Contact us: +91 73832 79438 | info@lukeronlubricants.com

Share this article

Need lubricants for your business?

Tell us what you use and how much. We reply within 24 hours. Just your name and mobile number.

Chat on WhatsApp

We use your details only to reply to this request. See our privacy policy.

Related Lukeron product families

More from the journal

Need the right grade, pack size and price?

Tell us your machine, fleet or brand. We reply within 24 hours.