By Lukeron Lubricants · Last updated
A hydraulic press in a ceramic tile plant works under high pressure, in a hot and dusty shop. The hydraulic oil is the part nobody sees until it fails. This guide explains what a ceramic press asks of its oil and how to choose the grade and type.
Pressure: protect the pump and valves
A press pushes oil through narrow valves at high pressure. An oil that is too thin at working temperature loses its protective film, and the pump and cylinders wear. An anti-wear (AW) hydraulic oil carries additives made to protect the pump under pressure. Follow the grade the press maker names.
Heat: keep the thickness steady
Plants in Gujarat and Rajasthan can be very hot, and a hydraulic system adds heat of its own. Hot oil ages faster and thins out. A high viscosity index (HVI) hydraulic oil keeps its thickness better when the temperature changes, so it suits machines that start cold and run hot. Good cooling and a clean cooler help any oil last longer.
Dust: keep the oil clean
Ceramic production is a dusty environment. Fine dust can get into the tank through breathers and open fill points, and dirty oil blocks filters and wears valves, which makes a press sluggish or inaccurate. Keep the breather and the filters in good order, fill through a clean filter and keep drums closed.
Which oil: AW or HVI?
Most presses run on an anti-wear hydraulic oil in the ISO VG grade the maker names, often VG 46 or VG 68. An HVI oil is worth considering where the temperature swings widely. Do not mix types or brands without checking compatibility. Our guides on hydraulic oil grades and on what hydraulic oil is explain the choice.
What to check before you choose
- The grade and type named in the press manual.
- The seals: check that the oil is compatible with the seal material in the cylinders.
- The working temperature and how hot the tank runs.
- The condition of the oil and the filters.
Lukeron hydraulic oils
Our anti-wear hydraulic oil range is available in ISO VG 32, 46 and 68, with HVI options, in 20 litre and 210 litre packs. Tell us your press, the grade in the manual and the working temperature, and we will help you choose, and send a free sample to test. Contact: +91 73832 79438 | info@lukeronlubricants.com
