By Lukeron Lubricants ยท Last updated
Quick answer
The two numbers in 5W-30, 5W-40 and 0W-20 are the SAE viscosity grade. The first number (with W for winter) shows how easily the oil flows when cold, and a lower number flows better. The second shows how thick it stays when hot. 0W-20 is the thinnest of the three, 5W-30 is in the middle, and 5W-40 has the same cold grade as 5W-30 but stays thicker when hot. Use the grade your owner's manual names, with the API level it asks for.
5W-30, 5W-40 and 0W-20 at a glance
| Grade | Cold flow | Hot thickness | Often named for |
|---|---|---|---|
| 0W-20 | Flows best of the three | Thinnest of the three | Newer petrol engines built for low-viscosity oil |
| 5W-30 | Flows well | In the middle | Very many cars, a common grade |
| 5W-40 | Flows well | Thickest of the three | Some European and performance cars, some diesels |
General guidance only. Follow the vehicle maker's manual for grade and API level.
Newer cars often ask for thinner engine oils than older ones, and the shelf is full of grades that look alike: 5W-30, 5W-40 and 0W-20. Which one does your car need? This guide explains what the numbers mean, how the three grades differ, and why the grade in your owner's manual is the one to use.
What do the numbers in 5W-30, 5W-40 and 0W-20 mean?
These are SAE viscosity grades. Viscosity is how thick an oil is. The first number, followed by the letter W for winter, shows how well the oil flows when the engine is cold. A lower number means the oil flows more easily on a cold start. The second number shows how thick the oil stays when the engine is hot. A higher number means the oil stays thicker at working temperature.
So 0W-20 flows best when cold and is the thinnest when hot. 5W-30 flows well when cold and sits in the middle when hot. 5W-40 has the same cold grade as 5W-30, so it flows about the same when cold, but it stays the thickest of the three when hot.
5W-30 vs 5W-40: the main difference
- Both have the same cold grade, 5W, so they flow about the same on a cold start.
- 5W-40 stays thicker when the engine is hot. 5W-30 is a little thinner.
- Some makers name 5W-40 for certain engines, for example some European and performance cars and some diesels. Many makers name 5W-30.
- Neither is better in general. The grade in the manual is the right one for your engine.
0W-20 vs 5W-30: the main difference
- 0W-20 is thinner than 5W-30, both when cold and when hot.
- Makers specify 0W-20 for engines built for a low-viscosity oil, often to save fuel.
- Oils with a 0W cold grade are normally made with synthetic base oils.
- Do not use 0W-20 in a car that names 5W-30, or the other way round, unless the maker allows it.
Which grade for your car?
Use the grade in your owner's manual. It also names the API service level, such as API SP for petrol engines, which is a second thing to match. If the manual names two grades, for example 0W-20 and 5W-30, the maker allows both, and the manual may say which suits hot or cold climates or hard use. Do not pick a grade because a friend uses it in a different car.
Does it matter in a hot country like India?
The maker chooses the grade for the engine, and the manual is the guide for most cars in both summer and winter. In a very hot place, or if the car works hard, for example with heavy loads or in slow traffic, ask the maker or an authorised service centre whether another allowed grade suits you. Do not change grade on your own to fix an engine problem.
Does a thinner oil protect less?
Not if it is the grade the engine was designed for. Engines built for 0W-20 are designed with that oil in mind. The same thin oil in an engine built for a thicker grade may not be right. What matters is the match with the manual, plus the API level, not the thickness alone.
Mineral, semi-synthetic or fully synthetic?
The viscosity grade (such as 5W-30) and the base oil type are two separate things. A 5W-30 can be semi-synthetic or fully synthetic. Check that the oil meets the grade and the API level the manual asks for. Our guide on mineral vs synthetic engine oil explains the types.
What if I lost the owner's manual?
Ask an authorised service centre for your model, or look up your model on the maker's website. Do not guess from another car, even from the same brand, because the right grade depends on the engine.
Lukeron engine oils in these grades
Lukeron Lubricants makes SPL PCMO passenger car engine oils in 5W-30 API SP (semi-synthetic and fully synthetic) and 0W-20 API SP (fully synthetic), in 3.5 and 4.5 litre packs and in 50 and 210 litre drums. We offer free samples to garages, OEMs and industries, and we handle private label orders. Send your enquiry with the grade and the pack size you need, and we reply within 24 hours.
