๐Ÿ“ Meet Lukeron at Kutch Industrial Expo, 11โ€“13 DecStall C-338, Hall C, Dome 3 ยท WhatsApp: Office ยท Sales
Lukeron Lubricants Private Limited โ€“ It's not an oil, it's a medicine

Automotive ยท November 22, 2026

Base Oil Groups Explained: Group I, II, III, IV and V

By Lukeron Lubricants ยท Last updated

Quick answer

Base oil is the main liquid in a lubricant, and the API sorts it into five groups. Groups I, II and III are mineral oils made from crude oil, refined to a higher level at each step. Group IV is PAO, a fully synthetic oil. Group V is every other base oil, such as esters. The group is one fact about the oil. The grade and the specification on the data sheet matter just as much.

API base oil groups at a glance

GroupWhat it isSaturates and sulphurViscosity index
Group ISolvent-refined mineral oilUnder 90% saturates and/or over 0.03% sulphur80 to 120
Group IIHydroprocessed mineral oil90%+ saturates, 0.03% sulphur or less80 to 120
Group IIISeverely hydrocracked mineral oil90%+ saturates, 0.03% sulphur or less120 or more
Group IVPAO (polyalphaolefin), syntheticNot setNot set
Group VAll other base oils, for example estersNot setNot set

API base oil categories as commonly published. Always use the data sheet of the actual product.

Every engine oil, gear oil, hydraulic oil and grease is mostly base oil, with additives mixed in. You will often hear terms like Group II, Group III or PAO, and the word synthetic used for very different oils. This guide explains the five API base oil groups in plain words, how they differ, and what the group does and does not tell you about the oil in the pack.

What is base oil?

Base oil is the main liquid in a lubricant. It does most of the lubricating. Additives are added to give what the base oil cannot give alone, such as cleaning, wear protection, rust protection, foam control and resistance to ageing. In most finished lubricants the base oil is the larger part by volume.

What are the five base oil groups?

The American Petroleum Institute (API) sorts base oils into five groups. Groups I to III are mineral oils made from crude oil, refined to different levels. Group IV is PAO, which is made by building the molecules from smaller ones. Group V is every other base oil, such as esters.

  • Group I: solvent-refined mineral oil. Less than 90% saturates and/or more than 0.03% sulphur, with a viscosity index of 80 to 120.
  • Group II: hydroprocessed mineral oil. At least 90% saturates, no more than 0.03% sulphur, viscosity index of 80 to 120.
  • Group III: severely hydrocracked mineral oil. At least 90% saturates, no more than 0.03% sulphur, viscosity index of 120 or higher.
  • Group IV: PAO (polyalphaolefin), a fully synthetic base oil.
  • Group V: all other base oils not in Groups I to IV, for example esters. Often used in small amounts mixed with another group.

What do saturates, sulphur and viscosity index mean?

Saturates are the stable, less reactive part of the oil. A higher saturate level generally goes with better resistance to ageing. Sulphur is an impurity that refining reduces. Viscosity index (VI) shows how much the oil thins out as it gets hot. A higher VI means the thickness changes less between cold and hot.

Group I vs Group II vs Group III: the main differences

  • Group I is the least refined of the three and has the widest mix of molecules. It is used widely in many ordinary applications.
  • Group II is more refined, so it is cleaner and more uniform than Group I and generally resists ageing better.
  • Group III is refined the furthest and has a higher viscosity index. It is often used in oils sold as synthetic or semi-synthetic.
  • More refined does not mean right for every job. The right base oil is the one that suits the grade, the specification and the use.

Is Group III oil synthetic?

It depends on the country and the rules there. Group III starts as crude oil, like Groups I and II, but it is processed so far that in many markets it can be sold as synthetic. Group IV (PAO) is synthetic in the strict sense because it is built from smaller molecules. This is why the word synthetic on a pack does not tell you the base oil group on its own.

Where are Group IV and Group V used?

PAO (Group IV) and esters (Group V) are used where a lubricant has to work over a wide temperature range or under demanding conditions, and in some premium engine oils, gear oils and greases. Esters are often used in small amounts with another base oil. They cost more than mineral base oils, which is one reason they are not used everywhere.

Mineral, semi-synthetic and fully synthetic: how does it connect?

Mineral, semi-synthetic and fully synthetic are labels for the kind of base oil in the pack. Mineral oil is made from refined crude oil. Semi-synthetic oil mixes mineral and synthetic base oils. Fully synthetic oil uses synthetic base oil. The rules for using the word synthetic differ by country, so the label alone does not show the group. Our guide on mineral vs synthetic engine oil explains the types.

Does the base oil group decide the quality of the oil?

No, not on its own. The base oil group is one part. The additive package, the viscosity grade and the performance level (API, ACEA, ISO or NLGI, depending on the product) matter just as much. A product should be judged on the grade and specification it meets, which the data sheet shows. Our guide on reading a lubricant data sheet explains how.

How do I know which base oil is in a product?

Packs often do not name the base oil group. Ask the supplier, and ask for the data sheet. The data sheet shows the viscosity, viscosity index and other test values, which tell you more about how the oil behaves than the word synthetic.

Which base oil group do I need?

Choose by the specification the vehicle or equipment maker asks for, not by group. The manual or the equipment maker names the grade and the performance level. If a buyer or a brand owner is deciding what to make, the target grade, the specification and the price band decide which base oil suits.

Lukeron lubricants and base oils

Lukeron Lubricants makes engine oils, gear oils, hydraulic oils, greases and other lubricants for buyers across India and for export. For private label and custom orders, we can work from the grade, the specification and the performance level you need. We offer free samples to garages, OEMs and industries, and we reply to enquiries within 24 hours.

Share this article

Base oil group questions, answered

What are the five base oil groups?+

Group I is solvent-refined mineral oil, Group II is hydroprocessed mineral oil, Group III is severely hydrocracked mineral oil, Group IV is PAO and Group V is every other base oil, such as esters.

What is the difference between Group I, Group II and Group III?+

They are all mineral oils made from crude oil. Each is refined further than the one before. Group II is cleaner and more uniform than Group I. Group III has a higher viscosity index than Group II.

Is Group III base oil synthetic?+

It depends on the country. Group III starts as crude oil, but it is processed so far that in many markets it can be sold as synthetic. Group IV (PAO) is synthetic in the strict sense.

What is PAO?+

PAO stands for polyalphaolefin. It is the Group IV base oil, built from smaller molecules instead of being refined from crude oil.

What is Group V base oil?+

Group V is every base oil that is not in Groups I to IV, for example esters. It is often used in small amounts with another base oil.

What is viscosity index?+

Viscosity index (VI) shows how much an oil thins out as it gets hot. A higher VI means the thickness changes less between cold and hot.

What are saturates in base oil?+

Saturates are the stable, less reactive part of the oil. A higher saturate level generally goes with better resistance to ageing.

Does the base oil group decide the quality of the oil?+

Not on its own. The additive package, the viscosity grade and the performance level matter as well. Judge a product by the specification it meets on the data sheet.

How do I know which base oil group is in a product?+

Packs often do not say. Ask the supplier and ask for the data sheet, which shows the viscosity, viscosity index and other test values.

What is base oil called in Hindi and Gujarati?+

Base oil is written เคฌเฅ‡เคธ เค‘เคฏเคฒ in Hindi and เชฌเซ‡เช เช“เช‡เชฒ in Gujarati. Terms like Group II and PAO are written the same in every language.

Does Lukeron offer free samples?+

Yes. Lukeron offers free samples to garages, OEMs and industries, and replies to enquiries within 24 hours.

More: Understanding base oil groups, for export buyers ยท Mineral vs synthetic engine oil ยท How to read a lubricant data sheet (TDS) ยท What is engine oil? How to read the label ยท Private label lubricants ยท All Lukeron products ยท Mineral vs semi-synthetic vs fully synthetic, for buyers ยท Custom formulation and consulting ยท Data sheets and catalogue downloads ยท Export buyers checklist: what to send a lubricant supplier

Standards and sources

  • NLGI grease consistency classification: Grease grades from 000 to 6, based on cone penetration (ASTM D217). Published by National Lubricating Grease Institute.
  • ACEA European Oil Sequences: European engine oil performance classes. Published by ACEA.

Standards are named so you can look them up. Always follow your equipment maker's manual.

Related Lukeron product families

More from the journal

Need the right grade, pack size and price?

Tell us your machine, fleet or brand. We reply within 24 hours.