By Lukeron Lubricants · Last updated
Quick answer
The ISO VG number is the viscosity of an industrial oil in centistokes (cSt) at 40°C. ISO VG 46 means 46 cSt at 40°C, within 10% either side. The grades follow a fixed ladder and each step is about one and a half times thicker than the one before. A higher number means a thicker oil, not a better oil. ISO VG is not the same as SAE, so use the grade your machine maker names.
ISO VG grades at a glance
| Grade | Viscosity at 40°C (cSt) | Often named for |
|---|---|---|
| ISO VG 10 | 9.00 to 11.0 | Fine spindles, light fast parts |
| ISO VG 22 | 19.8 to 24.2 | Spindles, some light hydraulic systems |
| ISO VG 32 | 28.8 to 35.2 | Hydraulic oils, turbine oils |
| ISO VG 46 | 41.4 to 50.6 | Hydraulic oils, turbine oils, screw compressors |
| ISO VG 68 | 61.2 to 74.8 | Hydraulic oils, compressor oils, some gearboxes |
| ISO VG 100 | 90.0 to 110 | Reciprocating compressors, some gearboxes |
| ISO VG 150 | 135 to 165 | Compressor oils, industrial gearboxes |
| ISO VG 220 | 198 to 242 | Industrial gearboxes |
| ISO VG 320 | 288 to 352 | Heavier industrial gearboxes |
| ISO VG 460 | 414 to 506 | Heavily loaded or slow gearboxes |
Ranges follow ISO 3448 (10% either side of the grade). Typical uses are general only. Follow the machine maker's manual.
Hydraulic oil, compressor oil, gear oil and turbine oil are all sold by an ISO VG number, such as 46, 68 or 220. The number is easy to read but easy to get wrong, especially if you know the SAE grades used on engine oil. This guide explains what ISO VG means, shows the grades in a chart, and says where each grade is often named.
What does ISO VG mean?
ISO VG stands for International Organization for Standardization Viscosity Grade. It is the system described in ISO 3448 for industrial liquid lubricants. Viscosity is how thick an oil is. The ISO VG number is the viscosity of the oil in centistokes (cSt, the same as mm²/s) measured at 40°C.
How does the ISO VG number work?
The number is the middle value of a range. An oil sold as ISO VG 46 has a viscosity at 40°C between 41.4 and 50.6 cSt, which is 10% either side of 46. There is only one reference temperature, 40°C, and only one number. There is no cold grade and no hot grade, as there is in SAE engine oil grades.
The ISO VG chart
The standard grades follow a fixed ladder: 2, 3, 5, 7, 10, 15, 22, 32, 46, 68, 100, 150, 220, 320, 460, 680, 1000 and 1500. Each step is about one and a half times thicker than the one before. The chart above shows the grades most buyers meet.
Where is each ISO VG grade often used?
- ISO VG 32, 46 and 68: very common for hydraulic oils. VG 46 is the most widely used single hydraulic grade.
- ISO VG 32 and 46: common for turbine oils, which are a separate higher-purity type and not the same as ordinary hydraulic oil.
- ISO VG 46, 68, 100 and 150: often named for compressor oils, depending on the compressor type.
- ISO VG 150, 220, 320 and 460: common for industrial gear oils, depending on the load, the speed and the gear maker.
- ISO VG 5 to 22: thin oils for fast, light parts such as spindles.
These are general patterns only. The machine maker's manual names the grade for your machine.
Does a higher ISO VG mean a better oil?
No. A higher number only means a thicker oil at 40°C. It is not a quality rating. The right grade is the one the equipment maker names. An oil that is too thick can flow slowly when cold and waste energy, and one that is too thin may not keep a proper film in a heavily loaded gear.
Is ISO VG the same as SAE?
No. They are two separate systems. SAE grades, such as 10W-30 or 80W-90, are used for engine oils and automotive gear oils and use their own scale. ISO VG is used for industrial oils and has one number at 40°C. A manual that says grade 46 almost always means ISO VG 46. Do not try to swap one for the other by number. Our viscosity converter tool gives approximate comparisons.
What about viscosity index?
The ISO VG number does not show how the oil behaves when it gets hot or cold. That is shown by the viscosity index (VI), which is a separate value on the data sheet. Two oils of the same ISO VG can have different viscosity index values. A higher VI means the oil thins out less as it heats up.
What is the AGMA number on a gear manual?
Some gear makers use AGMA grade numbers. They map to ISO VG grades, for example AGMA 2 matches ISO VG 68, AGMA 3 matches ISO VG 100, AGMA 4 matches ISO VG 150, AGMA 5 matches ISO VG 220 and AGMA 6 matches ISO VG 320. Check the manual and the data sheet of the oil.
Can I use a different ISO VG grade from the one in the manual?
Only if the maker allows it. Even one grade up or down changes how the oil behaves under load and at start-up. If you are unsure, ask the equipment maker or ask your oil supplier, and check the viscosity at 40°C on the data sheet.
How do I check the ISO VG of an oil?
Look at the data sheet. It shows the kinematic viscosity at 40°C, and the ISO VG grade is the grade whose range includes that value. It also shows the viscosity at 100°C and the viscosity index. Our guide on reading a lubricant data sheet explains the other values.
Lukeron industrial oils by ISO VG
Lukeron Lubricants makes hydraulic oils, compressor oils, industrial gear oils, turbine oils and spindle oils, in the ISO VG grades named on each product page. We offer free samples to garages, OEMs and industries, and we handle private label orders. Send your enquiry with the grade and the pack size you need, and we reply within 24 hours.
